Need help with your application? Contact us for expert advice on AMETEK Drexelbrook level instrumentation.
ABLE are AMETEK Drexelbrook’s Exclusive Representative for Sales and Service in the UK and Ireland and can assist you and your customers in the following areas:
- Application expertise across the full AMETEK Drexelbrook product range
- Our factory trained engineers offer after‑sales support, service and maintenance (contracts available)
- In‑depth AMETEK Drexelbrook product training, either in person or via video call
Further to the above, ABLE can offer customised solutions based on your individual requirements. Email us now at info@247able.com
AMETEK Drexelbrook IntelliPoint RF Loop Powered Level Switch
Auto‑Calibrating RF Admittance Level Switch with Coating Immunity and Self‑Diagnostics
ABLE Instruments are AMETEK Drexelbrook’s Exclusive Representative for Sales and Service in the UK and Ireland, including the ‘IntelliPoint RF’ Loop Powered Level Switch. The IntelliPoint RF – Loop Powered Level Switch provides dependable, auto‑calibrating point‑level detection across liquids, slurries, interfaces, and granulars. With RF admittance no‑calibration technology (No‑Cal™), simply power up and install—the device detects presence or absence of material without manual tuning. Cote‑Shield™ circuitry ensures immunity to coatings, build‑up or residue, while built‑in AutoVerify™ diagnostics continuously validate system health. Configuration-free and robust in diverse applications, IntelliPoint supports DPDT relay outputs and loop‑power operation—making it the ideal maintenance-free solution for critical level detection.
Key Features:
- No calibration required: Auto‑calibrates on power-up — no setpoint adjustments needed
- Cote‑Shield protection: Ignores coatings and build‑up on the sensing probe
- Continuous self‑diagnostics: AutoVerify™ and Manual Certify monitor system integrity
- Loop‑powered supply: Operates via 2‑wire 4–20 mA loop, no separate mains required
- Relay output: SPDT dry‑contact switching for alarm or fault conditions
- RF admittance technology: Reliable point-level detection with no moving parts
- Dual compartment housing: Isolates power wiring from intrinsic safety electronics
- Robust environmental rating: Suitable for cryogenic to high‑pressure applications
Have a particular project in mind? We’d welcome a call on +44 (0) 1189 169 420
IntelliPoint RF Loop Powered Specifications:
Technology | RF Admittance with Cote‑Shield coating immunity |
|---|---|
Calibration | None – Auto‑calibrates on power-up (No‑Cal™) |
Repeatability | 2 mm (0.08 in) in conductive liquids |
Response Time | <1 second |
Time Delay | 0–60 s forward or reverse acting |
Power Supply | Loop‑powered 13–30 VDC (2‑wire 4–20 mA) |
Relay Outputs | (2) SPDT dry‑contact relays: #2 configurable as fault or alarm |
Ambient Electronics Temp | −40 °C to +70 °C |
Storage Temperature | −40 °C to +85 °C |
Ingress Protection | IP66 / NEMA 4X |
Approvals | FM, FMc, ATEX, IECEx (Class I Div 1 / Zone 0) |