Pepperl+Fuchs KFD2-EB2 Power Feed Module
This Pepperl+Fuchs KFD2-EB2 Power Feed Module supplies the Power Rail with a voltage of 24 V DC and a maximum current of 4 A.
- Interface for Power Rail
- Supply current ≤ 4 A
- Replaceable fuse
- Relay contact output, reversible
- LED status indication
In the event of a device fault or a wiring fault of any isolator on the Power Rail, the collective error messaging relay alerts the controller via a binary I/O point. This relay can be configured as normally-open or normally-closed. A green LED on the front of the device indicates the power state, and a red LED lights up during a fault condition. In the sense of functional safety (SIL) the device provides no dangerous failures. Thereby the safe condition of the supplied isolators must be defined as the de-energised state. Thus the device will not influence the safety calculation or the SIL value. This device is compatible with all versions of the Power Rail.
Product Details
|
ETIM Class
|
Isolation amplifier
|
|---|---|
|
ETIM Group
|
Sensors
|
|
Alternative Part Number
|
189783
|
|
Tariff code
|
85365019
|
|
Generic code
|
PFPA60
|
|
Approved for
|
Class I, Division 2, Groups A, B, C, D; Class I, Zone 2, IIC
|
