Have a live application? Use our Flow Questionnaire and Rheonik Product Brochure to get started:
View ABLE Flow Questionnaire – Email back to [email protected]
ABLE are Rheonik’s Exclusive Representative for Sales and Service in the UK and Ireland and can assist you and your customers in the following areas:
- Assistance in meter sizing
- Offer after sales support, service and re-calibration utilising our in-house expertise
- Offer Coriolis Mass Flow Meter product training from our state-of-the-art training rig either in-person or via video call.
Further to the above, ABLE can offer custom solutions based on your individual requirements. Email us now at [email protected]
Rheonik RHM 04 Small Coriolis Mass Flow Meter < 18 kg/min
ABLE Instruments are Rheonik’s Exclusive Representative for Sales and Service in the UK and Ireland, including the RHM 04 Small Coriolis Mass Flow Meter. The RHM 04 is a game-changer in the world of precision applications, offering a fast response solution for batching, dispensing, and filling tasks. This remarkable meter is engineered to provide unparalleled performance in processes where Coriolis meter use was previously impractical.
With a remarkable flow range from 0.05 kg/min to 18 kg/min, the RHM 04 Coriolis Mass Flow Sensor caters to a wide spectrum of applications, ensuring it meets the demands of various industries, from pharmaceuticals to petrochemicals.
What truly sets the Rheonik RHM 04 Flow Sensor apart is its extraordinary capacity to withstand extreme pressures, reaching up to an astonishing 1401 bar (20319 psi). This high-pressure capability opens doors to applications that were once considered beyond the reach of Coriolis meters.
Features:
- Range: 0.05 kg/min up to 18 kg/min
- Pressure: up to 1401 bar (20319 psi)
- Temperature: -196°C (-321°F) up to +210°C (410°F)
- Accuracy: 0.1 % of rate
- Materials: SS 316L / SS 316Ti, Super Duplex – 1.4410, Sandvik HP160, Alloy C22 – 2.4602
- Process Connection: ¼” up to 1″
- Suitable for fiscal / custody transfer applications
- Available in all exotic materials
Temperature extremes pose no challenge for the RHM 04 Flow Sensor. It operates flawlessly in conditions ranging from a frigid -196°C (-321°F) to a scorching +210°C (410°F), maintaining its accuracy and precision. Speaking of precision, the RHM 04 boasts an accuracy rate of 0.1%, ensuring that the data it provides is consistently reliable. This level of accuracy is essential in industries where even the slightest deviation can have significant consequences. The Rheonik RHM 04 is constructed with a selection of robust materials, including SS316L, SS316Ti, Super Duplex – 1.4410, and Sandvik HP160, making it compatible with a wide range of liquids and resistant to corrosion. The meter’s adaptability is further enhanced by its process connections, ranging from ¼” to 1″, allowing for seamless integration into existing systems and setups.
In summary, the RHM 04 Coriolis Mass Flow Meter is a groundbreaking solution for precision applications, offering rapid response, high-pressure capabilities, and a wide operating temperature range. Its impressive performance parameters make it a top choice for industries seeking accuracy and reliability in their batching, dispensing, and filling processes.
Have a particular application / project in mind? We’d welcome a call on +44 (0) 1189 169 420, or email us now at [email protected]
Why choose Rheonik Coriolis Mass Flow Meters? Unlike other Coriolis Meters, the patented Omega tube design of Rheonik Coriolis meters has solutions for operation up to 1722 bar (24,969 psi) line pressure at a precision of 0,05% and with renowned mechanical reliability. With highly accurate mass flow measurement performance and extreme capabilities, Rheonik meters are the ideal choice for many applications and quickly provide payback through improved product quality and greatly reduced maintenance. Whether used for transfer batching, process feed or control, Rheonik Coriolis Mass Flow Meters provide online precise flow and density measurement.
RHM 04 Specifications:
Nominal Flow (Qₙₒₘ)* | 12 kg/min (26.46 lb/min) |
|---|---|
Maximum Flow (Qₘₐₓ)* | 18 kg/min (39.68 lb/min) |
Typical Minimum Flow (Qₘᵢₙ)* | 0.06 kg/min (0.13 lb/min) |
Serial Tube / Single Path | Flow rates Qmax, Qnom and Qmin for “serial” sensors will be 50% of the above listed parallel/dual path version |
Operating Temperature | Fluid temperature range options cover from -196 °C to +210 °C (-320 °F to +410 °F) For integral transmitter versions please refer to transmitter datasheet |
Ambient Temperature | -50 °C to +80 °C (-60 °F to +180 °F). High temperature version for oven installation up to +210 °C (+410 °F) available |
Pressure Ratings | Up to 1401 bar / 20319.79 psi – dependent upon material |
Electrical Connection Sensor w/o Integral Transmitter | M20 x 1.5 standard cable entry for JM, SM terminal box versions Optional entries available : ½” NPT or M25 x 1.5 (only for SM) or ¾” NPT (only for SM) M16 x 1.5 standard cable entry for PM terminal box version Max. cable length to remote RHE transmitter 100 m/330 ft. |
Sensor Enclosure Materials | Stainless steel 304 (standard), SS 316 (optional) Coated aluminium terminal box, SS 316 terminal box (optional) |
Enclosure Type | Protection class IP 66, NEMA 4 (standard), IP 66/67, NEMA 4X (optional) |
Wetted Materials | Flow tubes SS 316L, Sandvik HP160 or SuperDuplex Manifolds SS 316L, seals FKM, FFKM, FVMQ Standard flanges SS 316Ti, other connections SS 316L Additional/customer specific materials available upon request |
Process Connections | Nearly any – the Rheonik AnyPipeFit Commitment. Consult factory for types/sizes not listed in this data sheet on the Mechanical Construction pages |
Pressure Rating Compliance | PED 2014/68/EU Article 4, Section 3 (SEP) |
Certifications / Approvals | ATEX / IECEx Approvals Zone 0, 1, 2 (see page 19) North American Approvals Cl. I, Div. 1, 2, Gr. A, B, C, D, Zone 0, 1, 2 OIML, MID custody transfer approval American Bureau of Shipping (ABS) Product Type Approval for use on marine vessels |
Testing / Inspection | All sensors are hydro tested, calibrated and supplied with a traceable calibration certificate. Customised calibration and testing services are available |
Project Docs / QA, Services | Rheonik offers a full set of services for large and complex engineering projects. – Certificates of origin and conformity, mill certificates |
Options | Customisation services for machine integration. |
* At Qnom pressure drop across a parallel tube sensor will be approximately 1.6 bar (23.2 psi) for H₂0. Sensors can be operated at higher flow rates up to Qmax but pressure drop will be higher. Typical Minimum Flow Qmin is the recommended lowest flow rate for an accurate measurement. Sensors will measure flow rates lower than Qmin but uncertainty will increase beyond 1 % of rate.
The flow rate specifications above relate to standard pressure, parallel tube, manifold sensor versions. Models with higher pressure ratings have increased wall thickness and will have higher pressure drops.
