Have a live application? Use our Flow Questionnaire and Rheonik Product Brochure to get started:
View ABLE Flow Questionnaire – Email back to [email protected]
ABLE are Rheonik’s Exclusive Representative for Sales and Service in the UK and Ireland and can assist you and your customers in the following areas:
- Assistance in meter sizing
- Offer after sales support, service and re-calibration utilising our in-house expertise
- Offer Coriolis Mass Flow Meter product training from our state-of-the-art training rig either in-person or via video call.
Further to the above, ABLE can offer custom solutions based on your individual requirements. Email us now at [email protected]
Rheonik RHM 06 Small Coriolis Mass Flow Meter < 36 kg/min
ABLE Instruments are Rheonik’s Exclusive Representative for Sales and Service in the UK and Ireland, including the RHM 06 Small Coriolis Mass Flow Meter. The RHM 06 Flow Sensor is a reliable and low maintenance solution for critical flow applications.
In the world of critical flow applications, the Rheonik RHM 06 stands as a paragon of reliability and convenience. Engineered to minimise risk and maintenance, this device proves itself as the ultimate “fit and forget” solution for industries where precision and dependability are non-negotiable.
The RHM 06 Coriolis Mass Flow Sensor is tailor-made for a wide range of applications, with an impressive flow capacity spanning from 0.1 kg/min to 36 kg/min. This versatility ensures it can meet the demands of various processes, from the most delicate to the most rigorous.
Features:
- Range: 0.1 kg/min up to 36 kg/min
- Pressure: up to 1722 bar (24975 psi)
- Temperature: -196°C (-321°F) up to +350°C (662°F)
- Accuracy: 0.1 % of rate
- Materials: SS 316L / SS 316Ti, Super Duplex – 1.4410, Alloy C22 – 2.4602
- Process Connection: ½” up to 1″
- Suitable for fiscal / custody transfer applications
- Available in all exotic materials
Even in high-pressure scenarios, the RHM 06 shines, with the capability to withstand pressures of up to a staggering 1722 bar (24975 psi). Such resilience is indispensable in industries where extreme pressures are commonplace. Temperature extremes pose no challenge for this robust device, as it can operate effectively in temperatures ranging from a bone-chilling -196°C (-321°F) to a scorching +210°C (410°F). It maintains its precision and accuracy in the harshest environments.
The RHM 06 boasts an accuracy rate of 0.1% of the rate, ensuring that the data it provides is consistently dependable. This level of precision is crucial for critical flow applications where the slightest deviation can have significant consequences. Its construction is built to last, with a choice of materials including SS 316L, SS 316Ti, and Super Duplex – 1.4410. This selection of wetted materials guarantees compatibility with a variety of liquids and safeguards against corrosion. Process connections ranging from ½” to 1″ enhance its adaptability, allowing for seamless integration into existing systems and configurations.
The Rheonik RHM 06 Coriolis Mass Flow Sensor is more than just a flow meter; it’s a steadfast partner in ensuring the success and safety of critical flow applications. Its low-maintenance design and impressive performance parameters make it a top choice for industries where reliability and precision are paramount.
Have a particular application / project in mind? We’d welcome a call on +44 (0) 1189 169 420, or email us now at [email protected]
Why choose Rheonik Coriolis Mass Flow Meters? Unlike other Coriolis Meters, the patented Omega tube design of Rheonik Coriolis meters has solutions for operation up to 1722 bar (24,969 psi) line pressure at a precision of 0,05% and with renowned mechanical reliability. With highly accurate mass flow measurement performance and extreme capabilities, Rheonik meters are the ideal choice for many applications and quickly provide payback through improved product quality and greatly reduced maintenance. Whether used for transfer batching, process feed or control, Rheonik Coriolis Mass Flow Meters provide online precise flow and density measurement.
RHM 06 Specifications:
Nominal Flow (Qₙₒₘ)* | 25 kg/min (55.1 lb/min) |
|---|---|
Maximum Flow (Qₘₐₓ)* | 36 kg/min (79.4 lb/min) |
Typical Minimum Flow (Qₘᵢₙ)* | 0.1 kg/min (0.22 lb/min) |
Serial Tube / Single Path | Flow rates Qmax, Qnom and Qmin for “serial” sensors will be 50% of the above listed parallel/dual path version |
Operating Temperature | Fluid temperature range options cover from -196 °C to +210 °C (-320 °F to +410 °F) For integral transmitter versions please refer to transmitter datasheet |
Ambient Temperature | -50 °C to +80 °C (-60 °F to +180 °F) (standard), versions available for installation in vacuum chamber (-260 °C / -430 °F) or oven (up to +210 °C / +410 °F) (optional) |
Pressure Ratings | Up to 1379 bar / 20000 psi – dependent upon material |
Electrical Connection Sensor w/o Integral Transmitter | M20 x 1.5 standard cable entry for JM, SM terminal box versions Optional entries available : ½” NPT or M25 x 1.5 (only for SM) or ¾” NPT (only for SM) M16 x 1.5 standard cable entry for PM terminal box version Max. cable length to remote RHE transmitter 100 m/330 ft |
Sensor Enclosure Materials | Stainless steel 304 (standard), SS 316 (optional) Coated aluminium terminal box, SS 316 terminal box (optional) |
Enclosure Type | Protection class IP 66, NEMA 4 (standard), IP 66/67, NEMA 4X (optional) |
Wetted Materials | Flow tubes SS 316L or SuperDuplex Manifolds SS 316L, seals FKM, FFKM, FVMQ Standard flanges SS 316Ti, other connections SS 316L Additional/customer specific materials available upon request |
Process Connections | Nearly any – the Rheonik AnyPipeFit Commitment. Consult factory for types/sizes not listed in this data sheet on the Mechanical Construction pages |
Pressure Rating Compliance | PED 2014/68/EU Article 4, Section 3 (SEP) |
Certifications / Approvals | ATEX / IECEx Approvals Zone 0, 1, 2 (details see page 18) North American Approvals Cl. I, Div. 1, 2, Gr. A, B, C, D, Zone 0, 1, 2 OIML, MID custody transfer approval American Bureau of Shipping (ABS) Product Type Approval for use on marine vessels |
Testing / Inspection | All sensors are hydro tested, calibrated and supplied with a traceable calibration certificate. Customized calibration and testing services are available |
Project Docs / QA, Services | Rheonik offers a full set of services for large and complex engineering projects. – Certificates of origin and conformity, mill certificates |
Options | Customisation services for machine integration. |
* At Qnom pressure drop across a parallel tube sensor will be approximately 2 bar (29 psi) for H₂0. Sensors can be operated at higher flow rates up to Qmax but pressure drop will be higher. Typical Minimum Flow Qmin is the recommended lowest flow rate for an accurate measurement. Sensors will measure flow rates lower than Qmin but uncertainty will increase beyond 1 % of rate.
The flow rate specifications above relate to standard pressure, parallel tube, manifold sensor versions. Models with higher pressure ratings have increased wall thickness and will have higher pressure drops.
